نمایش نتایج جستجو برای
کلمات کلیدی: Material
موارد یافت شده: 342
1 - Collaborative adsorption and photocatalytic degradation of high concentration pharmaceutical pollutants in water using a novel dendritic fibrous nano-silica modified with chitosan and UiO-66 (چکیده)2 - A new modified deep learning technique based on physics-informed neural networks (PINNs) for the shock-induced coupled thermoelasticity analysis in a porous material (چکیده)
3 - On the performance of a latent heat thermal storage unit integrated with a helically coiled copper tube and organic phase change materials: A lab-scale experimental study (چکیده)
4 - The effect of volume percentage of graphite coated by electroless method on the electrical resistance of silver graphite composite (چکیده)
5 - Advanced materials in sorbent-based analytical sample preparation (چکیده)
6 - Design of narrowband infrared emitters by hybridizing guided-mode resonance structures with van der Waals materials (چکیده)
7 - Rehabilitation of reinforced concrete beam: Sustainable restoration mortar with waste materials (چکیده)
8 - Magnetostrictive behavior of pure nickel core: A study on the effects of annealing and magnetization using VSM and optical microscopy techniques (چکیده)
9 - Laboratory investigation on the fracture toughness (Mode I) and durability properties of eco-friendly cement emulsified asphalt mortar (CRTS II) exposed to acid attack (چکیده)
10 - The Future of Ultrasonic Transducers: How Machine Learning is Driving Innovation (چکیده)
11 - Development of a phase-change material-based soft actuator for soft robotic gripper functionality: In-depth analysis of material composition, ethanol microbubble distribution and lifting capabilities (چکیده)
12 - Design and characterization of electro-active soft actuator based on phase transition of microencapsulated silicon-ethanol composite (چکیده)
13 - Design and synthesis of ZnGlu MOF/SBA-16 nanocomposite, and its performance as an environmentally friendly nanocomposite for solvent-free chemical fixation of CO2 to epoxides for high-yield synthesis of cyclic carbonates (چکیده)
14 - Using internal sinusoidal fins and phase change material for performance enhancement of thermal energy storage systems: Heat transfer and entropy generation analyses (چکیده)
15 - Transforming tree topping waste into flooring: a study on the production and evaluation of oriented strand board finish using urban and garden residues (چکیده)
16 - Retrieving optical parameters of emerging van der Waals microcrystals (چکیده)
17 - Free vibration Analysis of FG nonoplates using quasi-3D hyperbolic refined plate theory and the isogeometric approach (چکیده)
18 - Large Optical Nonlinearity of the Activated Carbon Nanoparticles Prepared by Laser Ablation (چکیده)
19 - An isogeometric degenerated shell formulation for geometrically nonlinear analysis of smart laminated shells (چکیده)
20 - Design, thermal simulation and experimental study of a hybrid solar dryer with heat storage capability (چکیده)
21 - The materiality of identified misstatements by auditors and earnings management (چکیده)
22 - Examination of the effects of porosity upon intensification of thermal storage of PCMs in a shell-and-tube type system (چکیده)
23 - Titanium dioxide nanoparticles as multifunctional surface-active materials for smart/active nanocomposite packaging films (چکیده)
24 - The effect of annealing treatment on thermoelectric properties of nanostructured Bi0.5Sb1.5Te3 thin films fabricated by Hydrothermal method and thermal evaporation (چکیده)
25 - Mass-specific flexural properties of a mycelium-based biocomposite (چکیده)
26 - Numerical Study of Gas Flow in Super Nanoporous Materials Using the Direct Simulation Monte-Carlo Method (چکیده)
27 - Graphene-based flame-retardant polyurethane: a critical review (چکیده)
28 - The effect of annealing treatment on thermoelectric properties of nanostructured Bi0.5Sb1.5Te3 thin films fabricated by ball milling and thermal evaporation (چکیده)
29 - Experimental investigation of effective parameters on productivity improvement of the EDM process for corrosion-resistant metals (چکیده)
30 - Analyzing FG shells with large deformations and finite rotations (چکیده)
31 - Static and dynamic analysis of FG plates using a locking free 3D plate bending element (چکیده)
32 - Nonlinear analysis of FG-sandwich plates and shells (چکیده)
33 - Easy-axis rotation in ferromagnetic monolayer CrN induced by fluorine and chlorine functionalization (چکیده)
34 - Rational design of carbon-based materials for purification and storage of energy carrier gases of methane and hydrogen (چکیده)
35 - Effects of glycerol and sorbitol on a novel biodegradable edible film based on Malva sylvestris flower gum (چکیده)
36 - Cooling enhancement of portable computers processor by a heat pipe assisted with phase change materials (چکیده)
37 - An efficient curved beam element for thermo-mechanical nonlinear analysis of functionally graded porous beams (چکیده)
38 - Thermal energy storage using nano phase change materials in corrugated plates heat exchangers with different geometries (چکیده)
39 - Development of optimal polymeric foams with superior sound absorption and transmission loss (چکیده)
40 - Sonosynthesis of super-alkaline calcium-strontium oxide nanoparticles: Size, morphology, and crystallinity affected the catalytic activity (چکیده)
41 - Bond strength characterization and estimation of steel fibre reinforced polymer - concrete composites (چکیده)
42 - Non‑classical thermal shock analysis of cracked functionally graded media (چکیده)
43 - A novel multiscale parallel finite element method for the study of the hygrothermal aging effect on the composite materials (چکیده)
44 - Prediction of compressive strength of cement mortar using chemical composition of raw materials (چکیده)
45 - A novel nanocomposite (g-C3N4/Fe3O4@P2W15V3) with dual function in organic dyes degradation and cysteine sensing (چکیده)
46 - Thermal performance prediction of a phase change material based heat-sink cooling system for a printed circuit board, using response surface method (چکیده)
47 - A comparative study to critically assess the designing criteria for selecting an optimal adsorption heat exchanger in cooling applications (چکیده)
48 - Geometric and Material Nonlinear Analyses of Trusses Subjected to Thermomechanical Loads (چکیده)
49 - Iranian’s attitudes toward law-abidingness in administration system in Iran (چکیده)
50 - On the performance of an innovative electronic chipset thermal management module based on energy storage unit concept utilizing nano-additive phase change material (NPCM) (چکیده)
51 - Lateral-Torsional Buckling of a Bidirectional Exponentially Graded Thin-Walled C-Shaped Beam (چکیده)
52 - A comparative study of bone remodeling around hydroxyapatite-coated and novel radial functionally graded dental implants using finite element simulation (چکیده)
53 - Buckling analysis of multilayer FG-CNT reinforced nanocomposite cylinders assuming CNT waviness, agglomeration, and interphase effects using the CUF-EFG method (چکیده)
54 - A comprehensive review on the effects of doping process on the thermoelectric properties of Bi2Te3 based alloys (چکیده)
55 - Free vibration of bi-directional functionally graded imperfect nanobeams under rotational velocity (چکیده)
56 - Two-Dimensional Geometrically Nonlinear Hyperelastic Wave Propagation Analysis in FG Thick Hollow Cylinders using MLPG Method (چکیده)
57 - An investigation on the properties of cementitious mortars made with electric arc furnace dust and red mud (چکیده)
58 - Alkaline earth metals doped VO2 nanoparticles for enhanced interfacial solar steam generation (چکیده)
59 - Recent advances in applications of surfactant‐based voltammetric sensors (چکیده)
60 - Conversion of 2D MXene to Multi‐Low‐Dimensional GerMXene Superlattice Heterostructure (چکیده)
61 - Identification and Evaluation of Main Research Themes for Earthquake Studies in Material and Energy Fields by Science Maps and Scientometric Methods (چکیده)
62 - A magnetic copper organic framework material as an efficient and recyclable catalyst for the synthesis of 1,2,3-triazole derivatives (چکیده)
63 - Synthesis and Characterization of a Novel Nanostructured Porous Hybrid Material Based on Salts of the Vanadonickelocuprate (II) POM with Multiwall Carbon Nanotubes (چکیده)
64 - Nonlinear dynamic analysis of FG carbon nanotube/epoxy nanocomposite cylinder with large strains assuming particle/matrix interphase using MLPG method (چکیده)
65 - Fabrication and experimental characterization of a modified heat-sink based on a semi-active/passive cooling strategy with fluid flow and nano-enhanced phase change material (چکیده)
66 - Spiritualism versus materialism: can religiosity reduce conspicuous consumption? (چکیده)
67 - Detection of foreign materials in cocoa beans by hyperspectral imaging technology (چکیده)
68 - Comment on: “UV–VIS spectroscopic studies of one pot chemically synthesized polyindole/poly(vinyl acetate) composite films” [Mater. Lett. 136 (2014) 251–253] (چکیده)
69 - A numerical study on the effects of nanoparticles and stair fins on performance improvement of phase change thermal energy storages (چکیده)
70 - Modified Burzynski criterion along with AFR and non-AFR for asymmetric anisotropic materials (چکیده)
71 - Hygrothermal degradation of elastic properties of fiber reinforced composites: A micro-scale finite element analysis (چکیده)
72 - Acceleration of melting process of phase change material using an innovative triplex-tube helical-coil storage unit: Three-dimensional numerical study (چکیده)
73 - Experimental and numerical investigation of polymethyl methacrylate scaffolds for bone tissue engineering (چکیده)
74 - Design and Analysis of Porous Functionally Graded Femoral Prostheses with Improved Stress Shielding (چکیده)
75 - Dual filler functionally graded polymermaterials – manufacturing process and characteristics (چکیده)
76 - Evaluation of land subsidence in Kashmar-Bardaskan plain, NE Iran (چکیده)
77 - Induction of osteogenesis in bone tumour cells by purine-conjugated zinc-hydroxyapatite (چکیده)
78 - Investigating the Rutting Behavior of Modified Asphalt Mixtures with Waste Materials (چکیده)
79 - The nonlinear dynamic analysis of elasto-plastic behaviour of the single-curved FGM shells under impact load (چکیده)
80 - A PARTICLE SWARM OPTIMIZATION ALGORITHM TO SUGGEST FORMULAS FOR THE BEHAVIOUR OF THE RECYCLED MATERIAL REINFORCED CONCRETE BEAMS (چکیده)
81 - Hygro-thermo-elastic nonlinear analysis of functionally graded porous composite thin and moderately thick shallow panels (چکیده)
82 - Exact solution for thermal–mechanical post-buckling of functionally graded micro-beams (چکیده)
83 - Detection of Lithologic Discontinuities in Soils: A Case Study of Arid and Semi-arid Regions of Iran (چکیده)
84 - Prediction the PEM Fuel Cell Performance Based on Cathod Properties using Neural Network Modeling (چکیده)
85 - Premature Failure of Grade-316Ti Stainless Steel Tubing in a Boiler Feed-Water Heat Exchanger in a Steel Complex (چکیده)
86 - A Comparative Study on the Thermoelectric Properties of Bismuth Chalcogenide Alloys Synthesized through Mechanochemical Alloying and Microwave-Assisted Solution Synthesis Routes (چکیده)
87 - The significant role of the glycine‐nitrate ratio on the physicochemical properties of CoxZn1−xO nanoparticles (چکیده)
88 - Energy, exergy and environmental analysis of glazed and unglazed PVT system integrated with phase change material: An experimental approach (چکیده)
89 - Design, fabrication and experimental characterization of whole-thermoplastic microvalves and micropumps having micromilled liquid channels of rectangular and half-elliptical cross-sections (چکیده)
90 - The antioxidant activity and total phenol content of seeds from four species of Apiaceae family under different storage conditions (چکیده)
91 - Improving the melting performance of PCM thermal energy storage with novel stepped fins (چکیده)
92 - Multipole expansion of periodic discrete dipole approximation and its application to subwavelength dielectric arrays (چکیده)
93 - The effect of contrast material on radiation dose during computed tomography pulmonary angiography (چکیده)
94 - Numerical and experimental study of discharge mechanism in the electrochemical discharge machining process (چکیده)
95 - A New Approach to Improve IPMC Performance for Sensing Dynamic Deflection: Sensor Biasing (چکیده)
96 - Geometrically nonlinear dynamic analysis of FG graphene platelets-reinforced nanocomposite cylinder: MLPG method based on a modified nonlinear micromechanical model (چکیده)
97 - An agent-based coupled heat and water transfer model for air frying of doughnut as a heterogeneous multiscale porous material (چکیده)
98 - Modeling of shape memory alloy springs using a recurrent neural network (چکیده)
99 - Nonlinear dynamic analysis of moving bilayer plates resting on elastic foundations (چکیده)
100 - Numerical investigation into dynamic behaviors of axially moving functionally graded porous sandwich nanoplates reinforced with graphene platelets (چکیده)
101 - THE IMPORTANCE OF UTILIZING SUPPLEMENTARY VOCABULARY MATERIAL IN FORMATIVE AND SUMMATIVE ASSESSMENT OF READING COMPREHENSION: A STUDY ON IRANIAN UPPER INTERMEDIATE EFL LEARNERS (چکیده)
102 - Macromodel-based simulation of membrane action in reinforced concrete structural members (چکیده)
103 - A review on potentials of coupling PCM storage modules to heat pipes and heat pumps (چکیده)
104 - NONLINEAR DYNAMIC ANALYSIS OF AN AXIALLY MOVING POROUS FG PLATE SUBJECTED TO A LOCAL FORCE WITH KINETIC DYNAMIC RELAXATION METHOD (چکیده)
105 - Nonlinear material and geometric analysis of thick functionally graded plates with nonlinear strain hardening using nonlinear finite element method (چکیده)
106 - Numerical study of the effects of nanofluids and phase-change materials in photovoltaic thermal (PVT) systems (چکیده)
107 - Active tuning and maximization of natural frequency in three-dimensional functionally graded shape memory alloy composite structures using meshless local Petrov–Galerkin method (چکیده)
108 - An Iranian Perspective on Iran–US Relations: Idealists Versus Materialists (چکیده)
109 - Heat transfer enhancement in solidification process by change of fins arrangements in a heat exchanger containing phase-change materials (چکیده)
110 - Improving heat transfer in triplex tube heat exchanger containing phase-change materials by modifications of length and position of fins (چکیده)
111 - Lateral-torsional buckling of functionally graded tapered I-beams considering lateral bracing (چکیده)
112 - On the Geometrically Nonlinear Analysis of Composite Axisymmetric Shells (چکیده)
113 - Thermo-mechanical stability analysis of functionally graded shells (چکیده)
114 - Size dependent buckling analysis of nano sandwich beams by two schemes (چکیده)
115 - Size‑Dependent Pull‑In Instability Analysis of Electrically Actuated Packaged FG Micro‑Cantilevers under the Effect of Mechanical Shock (چکیده)
116 - A Geometrically Non-linear Stochastic Analysis of Two-dimensional Structures made of Neo-hookean Hyperelastic Materials Uusing MLPG Method: Considering Uncertainty in Mechanical Properties (چکیده)
117 - Effect of Cu doping on the structural and electrochemical properties of lithium-rich Li1.25Mn0.50Ni0.125Co0.125O2 nanopowders as a cathode material (چکیده)
118 - Experimental investigation of multiwall carbon nanotube/paraffin based heat sink for electronic device thermal management (چکیده)
119 - The relationship between cost stickiness and financial reporting quality in Tehran Stock Exchange (چکیده)
120 - CONSIDERATIONS FOR IN-SITU APPLICATION OF SUSTAINABLE RESTORATIVE MATERIALS IN THE PASARGADAE WORLD HERITAGE SITE (چکیده)
121 - Geometrically nonlinear analysis of FG doubly-curved and hyperbolical shells via laminated by new element (چکیده)
122 - Stability Analysis of Frame Having FG Tapered Beam–Column (چکیده)
123 - Detection of small number of Giardia in biological materials prepared from stray dogs (چکیده)
124 - Design of highly transmissive all-dielectric metasurface based on silicon nanodisks (چکیده)
125 - Experimental study of using both ethylene glycol and phase change material as coolant in photovoltaic thermal systems (PVT) from energy, exergy and entropy generation viewpoints (چکیده)
126 - Interaction of longitudinal phonons with discrete breather in strained graphene (چکیده)
127 - Static analysis of functionally graded non-prismatic sandwich beams (چکیده)
128 - Stability and free vibration analysis of tapered sandwich columns with functionally graded core and flexible connections (چکیده)
129 - Topics and Transitivity Choices in Iranian Learners English Writings (چکیده)
130 - Size-dependent analysis of functionally graded nanoplates using refined plate theory and isogeometric approach (چکیده)
131 - Free vibration Analysis of FG nonoplates using quasi-3D hyperbolic refined plate theory and the isogeometric approach (چکیده)
132 - Design of polarization splitting devices with ideal transmission and anisotropy considerations (چکیده)
133 - Experimental study on the effect of Zirconia nanoparticles on solidification heat transfer characteristics: A comparison with Titania nanoparticles (چکیده)
134 - Low-index surface investigation of KAlH4: Theoretical attempt to study the surface effect on the hydrogen storage properties (چکیده)
135 - Constructive Effects of Alkyl Chains: A Strategy to Design Simple and Non‐ Spiro Hole Transporting Materials for High‐ Efficiency Mixed‐ Ion Perovskite Solar Cells (چکیده)
136 - Calcium carbonate fouling on double-pipe heat exchanger with different heat exchanging surfaces (چکیده)
137 - A new efficient shear deformation theory for FG plates with in-plane and through-thickness stiffness variations using isogeometric approach (چکیده)
138 - Reflectionless design of a nonmagnetic homogeneous optical waveguide coupler based on transformation optics (چکیده)
139 - Porous materials in building energy technologies-A review of the applications, modelling and experiments (چکیده)
140 - An experimental investigation on stable arch formation in cohesionless granular materials using developed trapdoor test (چکیده)
141 - Two Dimensional Stress and Displacement Wave Propagation Under Shock Loading in Saturated Porous Materials with Two Dimensional Functionally Graded Materails Using MLPG Method (چکیده)
142 - A short review on modified carbon materials: promising materials for hydrogen storage (چکیده)
143 - Volume-of-Fluid Model for Simulating Vapor–Liquid Phase Change in a Solar Still (چکیده)
144 - ANALYTICAL MODELING OF A PIEZOELECTRIC ENERGY HARVESTERS UNDER RANDOM BASE EXCITATION (چکیده)
145 - Optimal control model for finite capacity continuous MRP with deteriorating items (چکیده)
146 - electronic and phononic modulation of mos2 under biaxial strain (چکیده)
147 - Numerical Study on Fluid-Structure Interaction in a Patient-Specific Abdominal Aortic Aneurysm for Evaluating Wall Heterogeneity and Material Model Effects on its Rupture (چکیده)
148 - Synthesis of LiFePO4 as the Cathode Material Used in Lithium Ion Batteries and Investigating the Effects of Synthesis Routes on Magnetic, and Physical Properties (چکیده)
149 - Compressive residual stress field in functionally graded material rotating disc under thermo-mechanical loading (چکیده)
150 - Nonlinear analysis of functionally graded piezoelectric energy harvesters (چکیده)
151 - Optimization of a solar air heater with phase change materials: Experimental and numerical study (چکیده)
152 - Nonlocal static analysis of a functionally graded material curved nanobeam (چکیده)
153 - Shock-induced stochastic dynamic analysis of cylinders made of saturated porous materials using MLPG method: considering uncertainty in mechanical properties (چکیده)
154 - Three-dimensional thermo-elastic analysis and dynamic response of a multi-directional functionally graded skew plate on elastic foundation (چکیده)
155 - The Effect of Openings on Buckling Resistance of Cylindrical Shells Made of Functionally Graded Materials (چکیده)
156 - Bending analysis of size- dependent functionally graded annular sector microplates based on the modified couple stress theory (چکیده)
157 - Design of reflectionless non-magnetic homogeneous polarization splitters with minimum anisotropy based on transformation electromagnetics (چکیده)
158 - An Experimental Investigation on the Generation of a Stable Arch in Granular Materials Using a Developed Trapdoor Apparatus (چکیده)
159 - A review on the applications of porous materials in solar energy systems (چکیده)
160 - Experimental investigation of the effects of using nano/phase change materials (NPCM) as coolant of electronic chipsets, under free and forced convection (چکیده)
161 - A modified Burzynski criterion for anisotropic pressure-dependent materials (چکیده)
162 - The value of song lyrics for teaching and learning English phrasal verbs: a corpus investigation of four music genres (چکیده)
163 - Exact natural frequencies and buckling load of functionally graded material tapered beam-columns considering semi-rigid connections (چکیده)
164 - Experimental study of using both ZnO/ water nanofluid and phase change material (PCM) in photovoltaic thermal systems (چکیده)
165 - Free vibration analysis of sigmoid functionally graded nanobeams based on a modified couple stress theory with general shear deformation theory (چکیده)
166 - Enhance heat transfer for phase-change materials in triplex tube heat exchanger with selected arrangements of fins (چکیده)
167 - Size‐Dependent Self‐Assembly of Lanthanide‐Based Coordination Frameworks with Phenanthroline‐2,9‐dicarboxylic Acid as a Preorganized Ligand in Hybrid Materials (چکیده)
168 - Isogeometric analysis of functionally graded plates using a new quasi-3D shear deformation theory based on physical neutral surface (چکیده)
169 - Density Functional Studies on Crystal Structure of Potassium Alanates as a candidate for Hydrogen storage (چکیده)
170 - Large Deformation Hyper-Elastic Modeling for Nonlinear Dynamic Analysis of Two Dimensional Functionally Graded Domains Using the Meshless Local Petrov-Galerkin (MLPG) Method (چکیده)
171 - Mechanochemical route to the synthesis of nanostructured Aluminium nitride (چکیده)
172 - Exergy analysis for a plate- fin triangular duct enhanced by a porous material (چکیده)
173 - Hygro-thermo-electro-elastic response of a functionally graded piezoelectric cylinder resting on an elastic foundation subjected to non-axisymmetric loads (چکیده)
174 - Elastic-plastic analysis of pressure vessels and rotating disks made of functionally graded materials using the isogeometric approach (چکیده)
175 - Elasto-Plastic Stress Analysis in Rotating Disks and Pressure Vessels Made of Functionally Graded Materials (چکیده)
176 - A curved triangular element for nonlinear analysis of laminated shells (چکیده)
177 - Non-linear Thermo-mechanical Bending Behavior of Thin and Moderately Thick Functionally Graded Sector Plates Using Dynamic Relaxation Method (چکیده)
178 - Density functional studies of structural and electronic properties of potassium alanate as a candidate for hydrogen storage (چکیده)
179 - Buckling Analysis of Variable Thickness Radially Functionally Graded Annular Sector Plates Resting on Two-Parameter Elastic Foundations by the GDQ Method (چکیده)
180 - Fabrication of Fe–TiC–Al2O3 composites on the surface of steel using a TiO2–Al–C–Fe combustion reaction induced by gas tungsten arc cladding (چکیده)
181 - On the Stress-Force-Fabric relationship in anisotropic granular materials (چکیده)
182 - On the fabrication of functional graded 3Y-PSZ/316L materials by SPS: Process optimization and characterization of the obtained products (چکیده)
183 - Comparative Evaluation of Crystallization Behavior, Micro Structure Properties and Biocompatibility of Fluorapatite-Mullite Glass-Ceramics (چکیده)
184 - General thermo-elastic solution of radially heterogeneous, spherically isotropic rotating sphere (چکیده)
185 - Pull-In Instability of Electrically Actuated FGM Micro-Beam Under the Mechanical Shock Based on Modified Couple Stress Theory (چکیده)
186 - Free vibration analysis of thick disks with variable thickness containing orthotropic-nonhomogeneous material using finite element method (چکیده)
187 - The effect of Al2O3-nanoparticles as the reinforcement additive on the hot deformation behavior of 7075 aluminum alloy (چکیده)
188 - Heteropolymolybdate- amino acid hybrid materials: Synthesis and characterization (چکیده)
189 - Tuning the dimensionality of hybrid inorganic-organic materials based on polyoxometalates (چکیده)
190 - Molecular dynamics simulation of lithium ion diffusion in LiCoO2 cathode material (چکیده)
191 - Two dimensional analysis of coupled non-Fick diffusion-elastodynamics problems in functionally graded materials using meshless local Petrov–Galerkin (MLPG) method (چکیده)
192 - Determination of tissue equivalent materials of a physical 8-year-old phantom for use in computed tomography (چکیده)
193 - Effects of nano iron oxide powder and urban solid waste compost coated sulfur on chemical properties of a saline-sodic soil (چکیده)
194 - Elastoplastic torsion of hollow FGM circular shaft (چکیده)
195 - Geometrically nonlinear dynamic analysis of functionally graded thick hollow cylinders using total Lagrangian MLPG method (چکیده)
196 - Three-dimensional stress field analysis of rotating thick bidirectional functionally graded axisymmetric annular plates with nonuniform loads and elastic foundations (چکیده)
197 - Size-Dependent Flexural Wave Propagation and Free Vibration of Functionally Graded Rayleigh's Micro- Beams Based on the Modified Couple Stress Theory (چکیده)
198 - Incorporation of new technique for processing of Al/SiCp composites based on Evaporative Pattern Casting (EPC) method (چکیده)
199 - Numerical and Experimental Analysis of the Fluid-Structure Interaction in Presence of a Hyperelastic Body (چکیده)
200 - Water scarcity conditions affect peach fruit size and polyphenol contents more severely than other fruit quality traits (چکیده)
201 - Blunt crack-tip elastoplastic zone of mixed mode fracture (چکیده)
202 - Large deflection analysis of moderately thick radially functionally graded annular sector plates fully and partially rested on two-parameter elastic foundation by GDQ method (چکیده)
203 - Elastic wave propagation and time history analysis in FG nanocomposite cylinders reinforced by carbon nanotubes using a hybrid mesh-free method (چکیده)
204 - Size-dependent free vibrations of electrostatically pre-deformed functionally graded micro-cantilevers (چکیده)
205 - The Effects of Volatile Materials of Non-coking Coal on the Reduction of Hematite (چکیده)
206 - Application of single unit impact dampers to harvest energy and suppress vibrations (چکیده)
207 - Geometrically nonlinear elastodynamic analysis of hyper-elastic neo-Hooken FG cylinder subjected to shock loading using MLPG method (چکیده)
208 - A non-ionic surfactant-mediated sol–gel coating for solid-phase microextraction of benzene, toluene, ethylbenzene and o-xylene in water samples using a gas chromatography-flame ionization detector (چکیده)
209 - Investigation of Nonlinear Bending Analysis of Moderately Thick Functionally Graded Material Sector Plates Subjected to Thermomechanical Loads by the GDQ Method (چکیده)
210 - First and second laws analysis of a minichannel-based solar collector using boehmite alumina nanofluids: Effects of nanoparticle shape and tube materials (چکیده)
211 - Utilization of 241Am-9Be Neutron Source in PGNAA Setup Used in Cement Raw Material Analysis (چکیده)
212 - A Monte Carlo Study of the Influence of Neutron Source Spectrum on PGNAA Facility Performance in Cement Raw Material Analysis (چکیده)
213 - Determination of Rock-fill Parameters Based on a Hardening Soil Model Using Large Scale Triaxial Test results (چکیده)
214 - Simultaneous isogeometrical shape and material design of functionally graded structures for optimal eigenfrequencies (چکیده)
215 - Three-dimensional static analysis of thick functionally graded plates using graded finite element method (چکیده)
216 - Three-dimensional transient analysis of functionally graded truncated conical shells with variable thickness subjected to an asymmetric dynamic pressure (چکیده)
217 - Application of a hybrid mesh-free method for shock-induced thermoelastic wave propagation analysis in a layered functionally graded thick hollow cylinder with nonlinear grading patterns (چکیده)
218 - Correlation of Apparent Thermal Conductivity and Electrical Resistivity of Moist Thermal Insulation Materials (چکیده)
219 - Pore size distribution analysis of activated carbons prepared from coconut shell using methane adsorption data (چکیده)
220 - Assessing Safety of Food Packaging Materials (چکیده)
221 - Application of a Hybrid Mesh-free Method Based on Generalized Finite Difference (GFD) Method for Natural Frequency Analysis of Functionally Graded Nanocomposite Cylinders Reinforced by Carbon Nanotubes (چکیده)
222 - Free vibration characteristics of functionally graded structures by an isogeometrical analysis approach (چکیده)
223 - Thermo-elastic optimization of material distribution of functionally graded structures by an isogeometrical approach (چکیده)
224 - An experimental investigating the width and height of a stable arch formed in granular materials by using a new developed trapdoor apparatus (چکیده)
225 - Decoration of carbon nanotube with sizecontrolled L10-FePt nanoparticles for storage media (چکیده)
226 - Analysis of two-dimensional functionally graded rotating thick disks with variable thickness (چکیده)
227 - Solutions to the problem of thermomechanical yielding in functionally graded material cylindrical vessels (چکیده)
228 - Plastic limit speed of FGM disc due to the variation of temperature and material composition (چکیده)
229 - Nano-spinel catalyzed reduction of imines to amines by sodium borohydride (چکیده)
230 - Two dimensional stress wave propagation in finite length FG cylinders with two directional nonlinear grading patterns using MLPG method (چکیده)
231 - A bending element for isotropic, multilayered and piezoelectric plates (چکیده)
232 - Synthesis of nanostructured AlN by solid state reaction of Al and diaminomaleonitrile (چکیده)
233 - High stable suspension of magnetite nanoparticles in ethanol by using sono-synthesized nanomagnetite in polyol medium (چکیده)
234 - Isogeometrical analysis of functionally graded materials in plane elasticity problems (چکیده)
235 - An improved isogeometrical analysis approach to functionally graded plane elasticity problems (چکیده)
236 - Three-dimensional transient analysis of functionally graded cylindrical shells subjected to asymmetric dynamic pressure (چکیده)
237 - Two-dimensional elastic wave propagation analysis in finite length FG thick hollow cylinders with 2D nonlinear grading patterns using MLPG method (چکیده)
238 - Meshless analysis of cracked functionally graded materials under thermal shock (چکیده)
239 - mputation of Stress Intensity Factor in Functionally Graded Plates under Thermal Shock (چکیده)
240 - Microstructure and mechanical properties evolution of 6061 aluminum alloy formed by forward thixoextrusion process (چکیده)
241 - Kochia Scoparia as A Model Plant to Explore the Impact of Water Deficit on Halophytic Communities (چکیده)
242 - On the role of aluminum powder on production copper foam by turning chips (چکیده)
243 - Stochastic hybrid numerical method for transient analysis of stress field in functionally graded thick hollow cylinders subjected to shock loading (چکیده)
244 - Free vibration analysis of functionally graded structures using a generalized isogeometric analysis approach (چکیده)
245 - IMPROVED SHORT CHANNEL EFFECTS IN 4H-SIC MOSFET WITH DUAL MATERIAL GATE STRUCTURE (چکیده)
246 - Conversion of W2C to WC phase during mechano-chemical synthesis of nano-size WC–Al2O3 powder using WO3–2Al–(1+x)C mixtures (چکیده)
247 - Evaluation of Geotechnical and Qualitative Properties of Fine Grained Construction Materials on North and Northeast of Mashhad City (چکیده)
248 - Coarse-Grained Molecular Dynamics Simulation of Lysozyme Protein Crystals (چکیده)
249 - Molecular Dynamics Simulation of Water and Ions in Nanopores of Lysozyme Protein Crystal (چکیده)
250 - WAVE PROPAGATION AND MECHANICAL SHOCK ANALYSIS IN FUNCTIONALLY GRADED THICK HOLLOWCYLINDER USING A HYBRID MESH-FREE METHOD (چکیده)
251 - An Investigation of aluminum foam produced by sintering evaporation process (چکیده)
252 - Aluminum nano particles as high energetic materials;Improvement on Combustion Performance through Nickel Deposition Particles Deposition on (چکیده)
253 - Two Novel Chiral Inorganic–Organic Hybrid Materials Containing Preyssler and Wells–Dawson Heteropolyoxometallates with Valine (val), Glycine (gly), and Proline (pro) Amino acids: (Hval)2(Hgly)(H3O)6K5[Na(H2O)P5W30O110].19.5H2O and (Hpro)6[P2W18O62].8H2O (چکیده)
254 - Transient dynamic and free vibration analysis of functionally graded truncated conical shells with non-uniform thickness subjected to mechanical shock loading (چکیده)
255 - survey effects of intent and materiality earning managment of ethical judgment of students in iran (چکیده)
256 - Analysis of elastic wave propagation in a functionally graded thick hollow cylinder using a hybrid mesh-free method (چکیده)
257 - Discrete element modeling of inherently anisotropic granular assemblies with polygonal particles (چکیده)
258 - Numerical modeling of charring material ablation with considering chemical reaction, mass transfer and surface heat transfer effects (چکیده)
259 - Axial Force Analysis in Axial Machines with Functionally-graded Permanent Magnet (چکیده)
260 - Welding of aluminum alloys through thermite like reactions in Al–CuO–Ni system (چکیده)
261 - The effect of material properties on the performance of a new geometry PEM fuel cell (چکیده)
262 - Elasto-plastic deformation analysis of rotating disc beyond its limit speed (چکیده)
263 - Optimization of cutting conditions in WEDM process using regression modelling and Tabu-search algorithm (چکیده)
264 - Optimal operation of alloy material in solidification processes with inverse heat transfer (چکیده)
265 - Functionally-graded Permanent Magnets for Power Transmission Applications (چکیده)
266 - Numerical Modeling of Non-Charring Material Ablation with Considering Chemical Reaction Effects, Mass Transfer and Surface Heat Transfer (چکیده)
267 - Thermal shock analysis and thermo-elastic stress waves in functionally graded thick hollow cylinders using analytical method (چکیده)
268 - Hybrid layerwise-differential quadrature transient dynamic analysis of functionally graded axisymmetric cylindrical shells subjected to dynamic pressure (چکیده)
269 - Synthesis and Characterization of Two Organic-Inorganic Hybrids Obtained fromReaction of Keggin-typ Polyoxometallates with 2-Amino-4-methyl pyridine and 2-Aminopyrimidine Spacers (چکیده)
270 - Two-dimensional dynamic analysis of thermal stresses in a finite-length FG thick hollow cylinder subjected to thermal shock loading using an analytical method (چکیده)
271 - Numerical analysis of thermal conductivity of charring material ablation with considering chemical reaction, mass transfer and surface heat transfer effects (چکیده)
272 - Stochastic Assessment of Thermo-Elastic Wave Propagation in Functionally Graded Materials (FGMs) with Gaussian Uncertainty in Constitutive Mechanical Properties (چکیده)
273 - Quantitative measuring of pearlite in carbon steels using electromagnetic sensor (چکیده)
274 - New Signal Processing Technique on Multiple Piezoelectric Sensor/Actuator for Structural Health Monitoring of Steel Structure Joints (چکیده)
275 - Analytical Solution for Two-Dimensional Dynamic Response Analysis of Functionally Graded Thick Hollow Cylinder with Finite Length Subjected to Impact Loading (چکیده)
276 - Axisymmetric yielding of functionally graded spherical vessel under thermo-mechanical loading (چکیده)
277 - Stochastic meshless local Petrov-Galerkin (MLPG) method for thermo-elastic wave propagation analysis in functionally graded thick hollow cylinders (چکیده)
278 - Development and Validation of a Two-Phase Model for Reinforced Soil by Considering Nonlinear Behavior of Matrix (چکیده)
279 - Syntheses and Characterization of Two Novel Inorganic-Organic Hybrid Materials Based on Polyoxotungstoborate: [L-C2H5NO2-H]3[H2BW12O40].5H2O and [CH4N2O-H]2[H3BW12O40].5H2O (C2H5NO2 = Glycine; CH4N2O = Urea), (چکیده)
280 - The Source of Dust Storm in Iran: A CASE STUDY BASED ON GEOLOGICAL INFORMATION AND RAINFALL DATA (چکیده)
281 - An industry guide for the prevention and control of odors at organic wastes processing facilities (چکیده)
282 - Thermo Elastic Wave propagation in functionally graded materials using meshless local Petrov-Galerkin (MLPG) Method (چکیده)
283 - On the role of filler materials on physical and mechanical properties of aluminum foam produced by SDP (چکیده)
284 - Synthesis of alumina reinforced nanostructured -brass by mechanochemical (چکیده)
285 - Application of Neural Networks for Characterization of Porous Materials (چکیده)
286 - Analytical solution of functionally graded plates with any combination of clamped and simply supported boundary conditions under transverse mechanical loading (چکیده)
287 - Transient and Dynamic Stress Analysis of Functionally Graded Thick Hollow Cylinder Subjected to Thermal Shock Loading Using an Analytical Method (چکیده)
288 - Numerical Analysis of Thermal Conductivity of Non-charring Material Ablation Carbon-Carbon and Graghite with Considering Chemical Reaction Effects , Mass transfer and surface Heat transfer (چکیده)
289 - Production of carbon nanotubes using mechanical milling in the presence of an exothermic reaction (چکیده)
290 - A calculation based on Green s function method for FM/MgO /FM sandwiches with roughness at interfaces (چکیده)
291 - On the application of Eddy Current non-destructive technique in mass production heat treating (چکیده)
292 - ON THE APPLICATION OF NON-DESTRUCTIVE EDDY CURRENT METHOD FOR QUALITY CONTROL OF HEAT TREATED PARTS (چکیده)
293 - EFFECTS OF UNCERTAIN MECHANICAL PROPERTIES ON TIME HISTORY OF STRESSES (WAVE PROPAGATION) IN THICK HOLLOW CYLINDER MADE OF FUNCTIONALLY GRADED MATERIALS (FGM) USING A PROBABILISTIC ANALYSIS (چکیده)
294 - An investigation on the variations occurring during Ni3Al powder formation by mechanical alloying technique (چکیده)
295 - Reliability of stress field in Al–Al2O3 functionally graded thick hollow cylinder subjected to sudden unloading, considering uncertain mechanical properties (چکیده)
296 - Electrical properties comparison of NTC thermistors prepared from nanopowders and mixed-oxide process (چکیده)
297 - Finite Element Analysis of Tension – Weak Materials (چکیده)
298 - Elasto – Plastic Analysis of Material with Uniaxial Symmetric Tresca Yield Condition and Cyclic Loading (چکیده)
299 - Time history analysis of stresses in functionally graded thick hollow cylinder subjected to thermal shock loading using analytical method (چکیده)
300 - Analysis of interlaminar stresses in general cross-ply laminates with distributed piezoelectric actuators (چکیده)
301 - Axisymmetric bifurcation analysis in soils by the tangential-subloading surface model (چکیده)
302 - Microdynamic analysis of oscillating transportation of particles (چکیده)
303 - ّFluidization in a vibrated column of spherical particles (چکیده)
304 - Static Analysis of Antisymmetric Cross-Ply Thick Laminated Plates Using a Layerwise Theory: The Lévy-Type Solution (چکیده)
305 - Strengthening of Steel-Concrete Composite Girders Using Carbon Fiber Reinforced Polymers Sheets (چکیده)
306 - Finite element modelling of cohesive crack propagation using crack-bridging rupture elements (چکیده)
307 - General analytical solution for elastic radial wave propagation and dynamic analysis of functionally graded thick hollow cylinders subjected to impact loading (چکیده)
308 - A Novel Hybrid Material Based on Two Symmetrically Independent Keggin (چکیده)
309 - Stochastic dynamic analysis of a functionally graded thick hollow cylinder with uncertain material properties subjected to shock loading (چکیده)
310 - Dynamic Stochastic Analysis of Radial Displacement in Functionally Graded Thick Hollow Cylinder Using Hybrid Numerical Method and Monte Carlo Simulation (چکیده)
311 - Increasing of energy efficiency in the Diesel engine using functionally graded materials (FGMs) (چکیده)
312 - Dynamic response of functionally graded hollow cylinder (چکیده)
313 - Analytical Solution in Transient Thermoelasticity of Functionally Graded Thick Hollow Cylinders (Pseudo-Dynamic Analysis) (چکیده)
314 - Dynamic Analysis of Alumina - Aluminum FG Cylinders Subjected to Thermal and Mechanical loads Using Analytical Solution (چکیده)
315 - Optimization of a Detector Collimator for Use in a Gamma-Ray Backscattering Device for Anti-Personal Landmines Detection (چکیده)
316 - EFFECT OF VARIOUS MATERIAL PARAMETERS ON THE CALCULATED VELOCITY-FIELD RELATION IN Al0.2Ga0.8N AT ROOM TEMPERATURE (چکیده)
317 - Analytical solution in transient thermo‐elasticity of functionally graded thick hollow cylinders (Pseudo‐dynamic analysis) (چکیده)
318 - Dynamic analysis of two-dimensional functionally graded thick hollow cylinder with finite length under impact loading (چکیده)
319 - Coupled thermoelasticity and second sound in finite length functionally graded thick hollow cylinders (without energy dissipation) (چکیده)
320 - Heat conduction and heat wave propagation in functionally graded thick hollow cylinder base on coupled thermoelasticity without energy dissipation (چکیده)
321 - Coupled thermoelasticity of a functionally graded THICK HOLLOW CYLINDERS (WITHOUT ENERGY DISSIPATION) (چکیده)
322 - Transient heat conduction in functionally graded thick hollow cylinders by analytical method (چکیده)
323 - Vibration and radial wave propagation velocity in functionally graded thick hollow cylinder (چکیده)
324 - Reduction of the Gamma Dose Equivalent due to 252Cf and 241Am-Be Neutron Sources in the Patients Soft Tissues When Using Body Chemical Composition Analyzer Bed (چکیده)
325 - Linear and Non-linear Analyses of Functionally Graded Plates Using Generalized Differential Quadrature Method (چکیده)
326 - A Heuristic Algorithm Approach for Free Vibration Optimization of Functionally Graded Adhesive Single Lap Joints (چکیده)
327 - Analytical Stress Analysis of Rotating Beam Due to Material Discontinuities (چکیده)
328 - Analytical Solution for Nonlinear Bending of FGM Plates by a Layerwise Theory (چکیده)
329 - Analytical Determination of Free Edge Stresses in Composite Laminates with Piezoelectric Material Properties (چکیده)
330 - Analysis of Interlaminar Stresses in General Cross-Ply Composite Plates Subjected to Free Vibration (چکیده)
331 - Separation of Fracture Modes in Functionally Graded Material Beams (چکیده)
332 - Modeling and Optimization of Functionally Graded Adhesive Single Lap Joints under free vibrations (چکیده)
333 - Higher-Order Coupled and Uncoupled Analyses of Free Edge Effect of Piezoelectric Laminates under Mechanical Loadings (چکیده)
334 - Nonlinear Analysis of Functionally Graded Plates in Cylindrical Bending under Thermomechanical Loadings Based on a Layerwise Theory (چکیده)
335 - Application of optimal RBF neural networks for optimization and characterization of porous materials (چکیده)
336 - Influence of spin reorientation on the magnetoelastic properties of NdFe10.5V1.5 (چکیده)
337 - Monte Carlo simulation of electron transport in metallic and biological materials (چکیده)
338 - On the Instability of a Cylindrical Soil Specimen (چکیده)
339 - Antisymmetric bifurcation in an elastoplastic cylinder with tangential plasticity (چکیده)
340 - Three-dimensional stress analysis of rotating composite beams due to material discontinuities (چکیده)
341 - Deformation and stress analysis of circumferentially fiber-reinforced composite disks (چکیده)
342 - Accurate Determination of Interlaminar Stresses in General Cross-Ply Laminates (چکیده)
